Mold in Kettle | 5 Tips To Get Rid of it – Pure Refreshment

By Charlotte Dim

Published on:

What to do if you have mold in kettle?

We are aware that calcium carbonate can accumulate in electric kettles; this can be cleaned with lemon, vinegar, etc. When someone notices mold in their kettle but doesn’t fully trust what they are seeing, they frequently ask this question.

In a tea kettle, mold can indeed develop. If your kettle includes a filter, make sure to clean it periodically or replace it to prevent mold. Mold can grow and prosper in the interior’s moist environment. That may also occur if you frequently leave water in your kettle. Mold can make you ill if you are not careful.

The reasons and prevention of mold in kettles will be discussed in this article.

Why Does Mold Grow?

We must first comprehend where mold typically grows in order to comprehend what can promote its development in a kettle.

remove mold from kettle

Common Environments for Mold Growth

Mold typically forms in bodies of water like lakes and rivers, food like bread, leaking pipes, etc. The environments mentioned above all have one thing in common: they are all damp.

Moisture and Mold Growth 

In order to spread and flourish, mold needs moisture. For this reason, you shouldn’t let water sit in a kettle for a long time. Mold cannot grow in water left in a kettle overnight because there is not enough time for it to do so before it becomes evident.

Must Read: Are Plastic Kettles Bad for Your Health- Ditch The Plastic

Effect of Light on Mold Growth

The lack of light (darkness) also promotes the growth and reproduction of mold. A light or bright environment does not support the growth of mold since light prevents it. Simpler still, minor kills molds.

Mitigation and Storage Tips

The interior of an electric kettle is a place where mold can grow because the majority of them are opaque (don’t let light through). Since you can’t really modify this, the most you can do is make sure your kettle is dry in case you decide to store it for months at a time without using it.

The Role of Water Acidity

The mold-growth-friendly is slightly acidic. Now, when we discuss acidity, we’re actually talking about the acidity of water or moisture, which is how acidic or alkaline the water you left in your kettle is.

Balancing Safety and Mold Growth

Typically, only bacteria and other undesired living things that pose a threat to human health are killed in our tap water. However, the pH of the water is not really a problem. 

They don’t pay much attention to the ph of the water, thus depending on the environment they come from, our water can occasionally be acidic or alkaline. And if it is acidic (but not overly acidic), it may foster a mold-friendly environment in your kettle.

How To Remove Mold From Kettle 

If your cattle are moldy, here are some washing tips to remove mold in kettle.

Use Vinegar or Lemon Juice:

About half the kettle should be filled with water and distilled white vinegar or lemon juice in a 1:1 ratio. The solution should come to a full boil.

Switch off the kettle. 

Give the acidic solution at least 20 to 30 minutes to sit. Fill your washbasin with the solution after that.

Pull the kettle’s plug.

Replace or clean the filter. Some filters are metallic; soak them for five minutes in hot water and distilled white vinegar. Use a bottle brush and sponge to scrub, then rinse with fresh water.

Use a sponge or scrubber:

Use a non-abrasive scrubber, sponge, or bottle brush with soft bristles to clean inside the kettle.  Use a soft sponge or scrubber soaked in warm water with some dishwashing solutions to clean the kettle’s exterior. 

To get rid of tenacious grime, dunk the sponge in some baking soda.

Wash the Kettle nicely:

When you are certain that all of the dirt has been eliminated, half-fill the kettle with water and bring it to a boil.

Once the water no longer tastes or smells like vinegar or dishwashing liquid, discard it and continue the rinse procedure.

Check This: Why are Kettle Chips Crunchier | Unveiling The Facts

How to Remove Kettle at Home?

If you want to remove mold in kettle using kitchen ingredients, here are some tips.

Use Baking Soda to Clean a Kettle.

Since you may already have baking soda in your kitchen, it can be the most practical method of cleaning your kettle. This makes it a useful and efficient cleaning technique. 

For removing light deposits from the bottom of your electric kettle, baking soda works effectively. White vinegar can be added to the mixture for a strong response. When vinegar and bicarbonate of soda combine, any remaining limescale in your kettle will be cleared away by the bubbly solution

After the reaction has occurred, boil the kettle and let it cool for an hour. It is necessary to fill the kettle to the three-quarter mark rather than all the way. To get rid of any leftovers, give it several rinses with water. This makes it secure.


  • Your kettle should contain 1-2 baking soda before being filled with water. up to a boil.
  • After turning off the heat, let the kettle rest for ten minutes.
  • Use a soft brush to gently scrape the inside of the kettle. Hold off until the kettle is touchably cool.
  • Use clean water to rinse, then pat dry with a dish towel.

Use vinegar to clean a kettle.

Add vinegar solution to make a paste that you can use to clean your kettle. That will assist in removing any tenacious dirt or grime. After using the kettle, be careful to thoroughly rinse it. 

Descaling your electric kettle while cleaning with diluted white vinegar is secure and efficient. Vinegar’s mild acidity aids in removing mineral buildup. Consult your owner’s manual for maintenance and cleaning instructions prior to cleaning your kettle.

After properly cleaning the kettle, dry it. Dry the interior and outside of the kettle with a soft towel to prevent spots and stains caused by water. Clean and dry the removable lid thoroughly if one is present.


  • Pour water and vinegar in equal parts, filling the kettle halfway. 
  • After bringing the mixture to a boil, let it cool for an hour. 
  • Rinse the kettle with water after draining the vinegar and water. 
  • Continue to brush until the limescale is gone.

Recommended: How Long Does a Kettle Take to Boil | A Complete Guide 

Without Vinegar, How to Clean a Kettle

If you have no vinegar in the kitchen, how can you clean the kettle quickly without it?

Use Lime or Lemon Juice.

  • Juice from a few lemons or limes squeezed. Juice and water should be combined in an equal amount. It must be sufficient to fill your kettle halfway.
  • Lemon slices should be cut up and added to the mixture. 
  • After bringing the kettle to a boil, let it sit for thirty minutes.

Use Soda or Coke:

  • The carbonated beverage can also descale your electric kettle because it is an acidic solution that can manage mineral deposits.
  • Bring the beverage to a boil in your kettle after filling it to the top by three-quarters. 
  • 30 minutes of cooling time should pass before discarding it.

Use Citric Acid Powder: 

  • Boil fresh water in the kettle until it is half full. 
  • To the boiling water, add two tablespoons of citric acid powder.
  • Before dumping the mixture, let the kettle sit for 20 minutes.

Use Baking Soda:

  • To the kettle, add a few teaspoons of baking soda and half the water.
  • The mixture should be heated to a boil before soaking for 20 to 30 minutes. 
  • Pour the solution out, then heat up some new water in the kettle.

Use a Kettle Cleaning Products:

  • Select any available commercial kettle cleanser. 
  • Observe the directions provided on the packaging.
  • In the kettle, combine the cleanser and water, and then bring it to a boil.
  • After letting it soak, discard the solution. 
  • Until there are no longer any odors in the kettle, boil fresh water and then discard.

Related: How Does A Cordless Electric Kettle Work? Let’s Explore

Frequently Asked Questions about Mold in Kettle

Question No.1: What is mold in a kettle, and how does it form? 

Answer: Mold in a kettle refers to the growth of fungi on the inner surface of the kettle. Moisture and warmth create the perfect breeding ground for mold spores in a kettle.

Question No.2: Is mold in a kettle harmful to health? 

Answer: Yes, mold in a kettle can be harmful to health. Mold produces allergens and mycotoxins, which can cause respiratory issues and allergic reactions if inhaled or ingested.

Question No.3: How can you identify mold in a kettle? 

Answer: Mold in a kettle typically appears as black or greenish spots or patches on the inside surface. It might also give off a musty odor.

Question No.4: What causes mold to grow in a kettle? 

Answer: Mold grows in a kettle due to a combination of factors, including moisture, warmth, and the presence of organic matter. Leftover water, tea leaves, or other contaminants inside the kettle can provide a suitable breeding ground for mold.

Question No.5: Can mold in a kettle affect the taste of boiled water or beverages? 

Answer: Yes, mold in a kettle can affect the taste of boiled water or beverages. It can impart a foul taste or odor, making the water or any beverages prepared in the kettle unpalatable.


In most instances, the circumstances needed for mold in kettle are possible but difficult to meet. Mold cannot grow if all the conditions are ideal and just one element is out of the ordinary. 

These influences are numerous, ranging from temperature to ph and water minerals, to name just a few. Because of this, most people won’t be able to see it and won’t even think it’s conceivable.

However, you might think about cleaning your kettle if you discover that mold has grown inside it. Lemon or vinegar can be used for this.

Charlotte is a seasoned writer and an established authority in the field of kitchen appliances. With a keen interest in culinary arts and a passion for providing practical guidance to consumers, Charlotte has dedicated years to researching and reviewing various kitchen products, including kettles.

Leave a Comment